Clamp On Circuit Breaker Lockout Over Sized Bullman BM-CBL13
Clamp On Circuit Breaker Lockout Over Sized Bullman BM-CBL13 are the primary point of electrical isolation for maintenance workers. The lockout tagout procedure usually begins by turning off power at the circuit breaker. But circuit breakers are many in design and number. The physical size and the voltage they carry will significantly affect the type of lockout device needed. Lockout devices for circuit breakers are designed to attach to the moving part, usually a switch toggle (rocker switch) which moves from the on to off position.
Lock out, tag out (LOTO) is a safety procedure in industry and research settings to ensure that dangerous machines are properly shut off. And not able to started up again prior to the completion of maintenance or repair work compleated.
Oversized Clamp-On Breaker Lockouts
This oversized 480/600V frame lockout fits breaker switches up to 2-1/4 in. wide and 7/8 in. thick and applies in seconds with thumbscrew mechanism, no screwdriver needed.
Oversized Clamp-On Breaker Lockouts are made of durable polypropylene and glass-filled impact-modified nylon.
This lockout device isolates and secures circuit breaker switches to protect employees against electrical accidents during equipment maintenance.
Electrical lockout lockouts body and button part are made of reinforced nylon PA material with wear resistance, corrosion resistance, good insulation and temperature difference resistance (-50℃~+177℃).
The miniature circuit breaker lockouts do not require any installation tools! The lock body comes with a button buckle design, and the installation can be easily completed by manually pressing the button. And The lever-type circuit breaker lock uses a finger-turned first wheel for quick installation.
Suitable for a variety of single-stage, multi-stage and any miniature circuit breakers to protect employees from electrical accidents during equipment maintenance.
They used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.
Made of plugged polypropylene and impact modified nylon.
Can used with lock out cleats in the bottom for hard to lock longer sliding switches and switches with large angular rotation.
Clamp On Circuit Breaker Lockout Over Sized Bullman BM-CBL13
Clamp On Circuit Breaker Lockout Over Sized Bullman BM-CBL13 are the primary point of electrical isolation for maintenance workers. The lockout tagout procedure usually begins by turning off power at the circuit breaker. But circuit breakers are many in design and number. The physical size and the voltage they carry will significantly affect the type of lockout device needed. Lockout devices for circuit breakers are designed to attach to the moving part, usually a switch toggle (rocker switch) which moves from the on to off position.
Lock out, tag out (LOTO) is a safety procedure in industry and research settings to ensure that dangerous machines are properly shut off. And not able to started up again prior to the completion of maintenance or repair work compleated.
Oversized Clamp-On Breaker Lockouts
This oversized 480/600V frame lockout fits breaker switches up to 2-1/4 in. wide and 7/8 in. thick and applies in seconds with thumbscrew mechanism, no screwdriver needed.
Oversized Clamp-On Breaker Lockouts are made of durable polypropylene and glass-filled impact-modified nylon.
This lockout device isolates and secures circuit breaker switches to protect employees against electrical accidents during equipment maintenance.
Electrical lockout lockouts body and button part are made of reinforced nylon PA material with wear resistance, corrosion resistance, good insulation and temperature difference resistance (-50℃~+177℃).
The miniature circuit breaker lockouts do not require any installation tools! The lock body comes with a button buckle design, and the installation can be easily completed by manually pressing the button. And The lever-type circuit breaker lock uses a finger-turned first wheel for quick installation.
Suitable for a variety of single-stage, multi-stage and any miniature circuit breakers to protect employees from electrical accidents during equipment maintenance.
They used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.
Made of plugged polypropylene and impact modified nylon.
Can used with lock out cleats in the bottom for hard to lock longer sliding switches and switches with large angular rotation.
Voltage: Large 480 Volts to 600 Volts.
Brand: Bullman
Item Code: BM-CBL 13
Origin: China.
Related products
Lockout Circuit Breaker Grip Tight Bullman BM-CBL32
Read moreLockout Gate Valve 6.5″-10″ Bullman BM-SGVL04
Read moreMiniature Circuit Breaker Lockout Pin Out Bullman BM-POS
Read moreLockout Circuit Breaker Grip Tight Bullman BM-CBL31
Download Data Sheet